Industrial & Manufacturing Blog
If your office building is too cold in the winter and too hot in the summer, then it likely needs to be better insulated. One of the best ways to insulate your building is to use a spray-foam product to seal up any holes or gaps in windows, doors, and electrical outlets. However, working with spray foam can be a bit tricky if you want the results to look nice and don't want to make a mess in the process.
2 November 2016
Industrial & Manufacturing Blog
If you are in the industrial industry, you might always be looking for ways to improve your factory. If you have not yet switched to using propane whenever possible in your factory, such as to power your machinery and equipment, then it's time to consider doing so. These are a few of the many benefits of using propane in a factory setting. 1. Keep Your Factory Going When the Power Goes Out
26 September 2016
Industrial & Manufacturing Blog
If your home's concrete foundation has shifted due to soil erosion and small cracks are visible in one of the concrete walls in your basement, you can repair the damage with the following steps. Once finished, consult with a company that specializes in foundation underpinning. Underpinning involves extending the depth of the current foundation so that it rests on a more stable surface, preventing additional damage in the future. Materials
17 August 2016
Industrial & Manufacturing Blog
If you've been having heating problems, you may be looking into heating repair options. Before you call a heating installation and repair specialist to your home, make sure that they can handle HVAC problems as well as furnace troubles; some heating issues relate to your HVAC design. Here are some potential problems to look for. The Air Isn't Flowing Properly If your problem is that some parts of the house aren't heating as well as other parts, then you may be dealing with a problematic air flow in your HVAC design.
4 August 2016